Group

When there are multiple encoders in the local area network, if you want some encoders to use the same parameters, you can set the group IDs of these encoders to be the same. For the same group of encoding parameters and network protocol settings, see Encoding Settings and Output Settings. The encoders of the same group will appear in the list of group settings, the user can select any encoder in the group to set network parameters, restart the operation, and can also summarize all the channel lists with the same group ID, and then synchronize to the same group. in the group. Encoders of different IP segments can also be set to the same group. All operations of the group only require that the encoders of the same group are in the same LAN, not the same IP segment, even if the IP conflicts, they cannot be operated (other manufacturers' When there is an IP conflict, one of the encoders must be turned off to set a new IP; but our encoder does not have this concern, using the group function to easily detect the IP conflict, and then change the conflicting IP).