Getting start

1. Connect the network cable and turn on the power

Use the supplied 12V1A power supply, if using POE power supply, no additional power supply is required. When the power is turned on, the Tally traffic light will flash once, indicating that the power is turned on.

2. Wait for the system to start, until the following interface appears on the OLED screen

In the OLED screen, the information displayed in order from top to bottom is:

• NDI name, used to search in other software, the name can be modified in the background web page

• Device IP, through which the web page background can be accessed. By default, the IP will be used as the device name, or it can be customized by the user.

• Signal source status, which can display the resolution and frame rate of the signal source

• Encoding rate, display the current encoding rate, you can set the encoding quality in the background of the web page

3.Search and connect using other NDI devices, software

NDI Tools

VMix